Summer Starts Here - Save up to 70%
Malone Axis Truck Bed and Roof Load Extender Installation - 2013 Chevrolet Silverado- Video
Speaker 1: Today, on our 2013 Chevrolet Silverado, we're going to be taking a look at the Malone Axis Truck Bed and Roof Load Extender, part number MPG907 00:00:10. This truck bed extender is going to give you 53 inches of extension from the center of your hitch pin hole to the edge so you can haul the longest loads such as ladders, lumber, steel tubing, piping, steel beams, rods. You name it, you can put it on here. And, it can hold 500 pounds on the truck bed extender. So, if you figure that across the entire truck bed, you can haul some heavy stuff. Unlike some other truck bed extenders, this one has tall load stops, which are also adjustable, increasing the maximum width of whatever you can haul behind you with a range of 28 inches up to 48 inches.There's plenty of tie down points on the load stops, and you can go underneath the arms. more
2/14/2018 10:58:00 AM
Erickson Hitch Cargo Carrier Review - 2008 Chevrolet Silverado- Video
Today, on our 2008 Chevrolet Silverado, we're going to be taking a look at the Erickson Big Bed Junior Load Extender for truck bed or roofs, part number EM07605. Whether we need to transport a ladder, go to the hardware store, pick up some sheets of plywood, or anything else that's longer than 8 feet, you know the headache if you don't have an 8-foot bed truck. That's where our bed extender's going to come into play. It's going to allow us to be able to support our load and carry it securely and have tie-down points so we can get down the road safely. Our truck bed extender is going to allow us from the hitch receiver here and extend out all the way to 48 inches or four feet. Since the tailgate is down, from the tailgate to the end of our extenders, it's going to be right about 33 inches. At the end of our extender here, we're going to have several different holes. Now this is going to be able to adjust the height and how high you need the back end up or how far down. more
6/6/2017 2:04:30 PM
Darby Extend-A-Truck Hitch Cargo Carrier Review - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado, we're going to be taking a look at the Darby Hitch Mounted Load Extender, part number DTA944. Now if you've ever hauled with your truck, I'm sure most of us have been in the situation where we either needed to carry a ladder, some lumber, or maybe even some drywall, and for us those that don't have eight-foot beds, and with most of the load sticking out, it is a little bit unsafe and using the extender is going to be able to give you a spot to tie your load down and make everything more secure. On each end of our extender we're going to have one tie-down point. That way no matter what we are carrying, it's going to be able to secure it down. Now here, with the included pin and clip, we can make our adjustments, so if you need your load to be angled down into your bed, you can raise it up, or if you need it at level, you can lower it down to make it level so your load sits how you want it to. Now our extender is going to work with 2-inch hitches, and it does also include the pin and clip for your hitch. Now our extended truck is going to give us 49" of extra load carrying capability. On the end here, we're going to be able to put all of our loads and anything else we need to carry for up to 4-feet wide. Now our extended truck is going to be able to hold and withstand up to 350-pounds of weight. more
4/19/2017 9:07:05 AM
Darby Extend-A-Truck Hitch Cargo Carrier Review - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado, we're doing a test fit of the Darby Extend-A-Truck Hitch Mounted Load Extender, part number DTA944. Now we already have it on our vehicle. We're going to go over some features in this position and then we'll go over the second position as well. With this position, it's going to be great if you are wanting to carry anything on your roof if you have even a roof rack on your truck and want to load up any lumber or PVC or any extended loads there. You can you use the tie-downs on our Extend-A-Truck and just lengthen the length of your truck to accommodate for all the different types of cargo that you may have there. We also have different adjustable points so if you did have a roof rack on your truck, you could lift the Extend-A-Truck part up just a bit to even out that distance. The pin and clip here actually do come with the Extend-A-Truck so you don't have to purchase an extra one for this piece here. more
12/11/2015 10:06:06 AM
Filter Videos
Filter Videos
